Doosan D35S-5 Service Manual page 225

Description for the components of the main screen
Configuration and User's Guide
①
②
Vehicle Selection
③
Diagnosis Menu
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
D439E Service Manual
Configure the "Setup", "User Information", "Software version" and
"Self-diagnosis".
Summarized user's manual.
Selects the vehicle model and system for diagnosing.
* The selected system will be shown in the blank box.
Shows the Diagnosis Trouble Code(DTC) on the screen by
communication with the selected vehicle system. Fault code will be
updated by continuous communication.
Checks the current data of ECU.
Supports supplementary vehicle S/W function except the basic
diagnosing functions (DTC, Current Data, Actuation Test).
Supports the ECU reprogramming.
Diagnoses the vehicle applied with OBD-II communication protocol.
Recording the current data for review and analysis.
Searches the DTC of selected systems, more than one system can
be searched at one time.
Mark for charging battery in connection with external power
(Lightening mark: Red)
Mark for full charged battery in connection with external power
(Lightening mark: Green)
Mark remained battery capacity in use (as battery is used, the
available battery amount is reduced.)
No rechargeable battery in the battery pack
223 5. Service Tool