Doosan D35S-5 Service Manual page 267

DTC Analysis with Dual Diagnosis Mode
• Check DTC Analysis and Data Analysis at the same time
1. On the DTC Analysis screen <Figure 1>, select
Function Menu is shown as in <Figure 7>.
2. On the "Function" menu, select the Current Data, and it changes to the Dual mode as shown in <Figure
8>.
• Using stylus pen, select it on the touch screen directly.
• After moving cursor using
<Figure 8: Dual Diagnosis Mode of DTC Analysis & Data Analysis >
D439E Service Manual
<Figure 7: DTC Analysis "Function Menu">
265
or
buttons, press
button, and then
button.
5. Service Tool