Doosan D35S-5 Service Manual page 278

Data Analysis on Dual Diagnosis Mode
• Check the Data Analysis and the DTC Analysis at one
1. On Data Analysis screen select
be shown as in <Figure 9>.
2. On the function menu, select the "DTC" to change the screen to the Dual mode as shown in <Figure 10>.
• Using the stylus pen, select it directly on the touch screen.
• Moving the cursor using
<Figure 10: Data Analysis & DTC Analysis on Dual Diagnosis Mode>
D439E Service Manual
<Figure 9: Function menu in Data Analysis>
,
or button, and then the Function Menu will
and press the
276
button.
5. Service Tool