Doosan D35S-5 Service Manual page 266

Selective erase of DTC
1. Select the DTC to be erased on DTC Analysis Screen.
2. Select the
3. The message for confirming erasion is displayed.
• When
DTC selected in step 1) is erased and message is displayed.
• When
DTC erase is cancelled.
Check Detailed Information of DTC
1. Select DTC on DTC Analysis.
2. Select
3. As shown in <Figure 6>, DTC information window is shown.
NOTE : Availability of this function is subject to control module.
D439E Service Manual
or button.
is selected :
is selected :
or button.
<Figure 6: DTC information>
264 5. Service Tool