Doosan D35S-5 Service Manual page 314

When for data recording time reaches to 1 hour, the message as in <Figure 12> will be shown and the data
recording is stopped automatically.
If additional data recording is required, save the currently recorded data and re-start the record mode.
2. Select
confirming window for checking the data saving path and saving file name will be shown as in <Figure 13>.
Select
Note: To change saved file name, please refer to the 'How to change the file name' in rear page.
Note: When the data recording confirm window is shown as <Figure 9> at saving the Flight Record file, the
saved file name is used as default file name. When user wants to change the file name, select the file
name zone in the saving information window using the stylus pen, then the Input Panel as <Figure 14>
is shown. After changing the file name, select
D439E Service Manual
<Figure 12: Saving Stop Pop-up at 1hr of Data Recording >
in the recording stop confirming window in <Figure 10>, the saving data
, and the save mode is terminated.
<Figure 13: Data Recording Information Confirm>
NOTE
.
312 5. Service Tool