Doosan D35S-5 Service Manual page 268

• Check DTC Analysis and Actuation Test at the same time
1. On DTC Analysis screen, select
shown as in <Figure 7>.
2. Select the "Actuation Test" on function menu, then it changes to Dual diagnosis mode as shown in <Figure
9>.
• Select it using stylus pen on the touch screen.
• After moving the cursor using
<Figure 9: DTC Analysis & Actuation Test on Dual Diagnosis Mode>
D439E Service Manual
or button, and then Function Menu will be
buttons, press
266
button.
5. Service Tool