Doosan D35S-5 Service Manual page 208

This indicates incorrect handling may lead to injury or damage to properties. Under certain conditions
more serious consequences may result.
• Do not drop G-scan.
• Do not place any objects (tools, manuals, etc.) on G-scan module.
• When connecting cables under the hood, secure the cables to avoid damage caused by hot or moving parts.
• When connecting the DLC cable (150109 - 00050), check the locking device.
• Observe correct polarity when connecting the power supply cable.
• Properly store all components when not in use.
• Do not use cables as carrying handle.
• Do not store products in places where
▪ Extremely high or low temperature (Refer to feature of products)
▪ Extremely high or low humidity (Refer to feature of products)
▪ Inside a vehicle during summer season for a long time
▪ Exposed to direct rays
• Avoid a shock or vibrations during carrying.
• Keep products away from moisture.
• Keep products away from flammable substances or places where fierce static electricity may occur.
• Products and accessories are not to be coated or painted with chemical substances or acid that can corrode
the equipment.
• Do not expose the equipment to X-ray or Microwave. This might cause severe damage to the equipment.
• When inserting SD card, check the direction.
• When supplying electric power to G-scan with 220/100V source, use the adapter supplied by GIT only.
• When using touch screen, use the specified stylus pen only. If you use other sharp or keen object on the
touch screen, it can be damaged severely.
• Do not store the battery in the hot area. It may reduce the longevity of battery.
• If G-scan with battery pack has to be stored for a long time(over 3 months), the environmental
condition(Temperature: 23±5℃, Humidity: 65±20%RH, Battery Level Indicator: 2 of 3 levels) should be
observed.
• When your eyes contact battery liquid, do not rub your eyes, but clean out them with fresh water. And
contact doctor immediately.
D439E Service Manual
CAUTION
206 5. Service Tool