Checking Standby Carriers - Optional - Hytera ACCESSNET-T IP DIB-R5 advanced Operation Manual

DIB-R5 advanced
5.
➔ You have successfully checked the availability.
4.3.5 Checking standby carriers ‒ optional
The DIB-R5 advanced optionally provides the redundancy option "Transceiver redun-
dancy" with up to two standby carriers that can replace two carriers that have dropped
out.
As a preventive maintenance measure, it is recommended to check the function of the
standby carriers at regular intervals, refer to
on page 83. This is done via the NMC-511 FaultManager.
Required product documents
Product
NMC-511 FaultManager
Operation Manual 90DIBR5advancedOM02 - 1.0
Function tests and operating surveillance > Checking standby carriers ‒ optional
Enter the following command to check the reachability of the network element:
ping <xxx>
<xxx> corresponds to the IP address of the respective component within the
DIB-R5 advanced.
ð The following output is displayed (example):
C:\Users\User>ping <xxx>
Ping is executed for <xxx> with 32 bytes of data:
Response from <xxx>: Bytes=32 Time<1 ms TTL=63
Response from <xxx>: Bytes=32 Time<1 ms TTL=63
Response from <xxx>: Bytes=32 Time<1 ms TTL=63
Ping statistic for <xxx>:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approx. time information in milliseconds: Minimum = 0 ms,
maximum = 0 ms, average = 0 ms
Ä Chapter 7.2 "Periodical visual inspections"
Document type
User Manual
Operation
Described in
Chapter 4
73