Table of Contents
Advertisement
Safety regulations
Safety markings > Safety markings on transport boxes
Transport inspection using impact indicators
To check whether a product was properly transported, the transport boxes are fitted with
impact indicators. The impact indicator shows heavy impacts or vibrations that were
caused by an improper transport.
The following chapters describe the used security markings and indicate that the corre-
sponding instructions must be followed.
2.4.2.1
Safety marking "Fragile"
The security marking "Fragile" points to the necessary protection of the product against
shock. Transport boxes with this marking must absolutely be protected against shock.
Figure 1: Safety marking "Fragile"
2.4.2.2
Safety marking "Transport Upright"
The security marking "Transport Upright" points to the cover of the transport box. Trans-
port boxes with this marking must always be transported with the cover at the top.
Figure 2: Safety marking "Transport Upright"
16
Operation Manual 90DIBR5advancedOM02 - 1.0
DIB-R5 advanced
Advertisement
Table of Contents
Need help?
Do you have a question about the ACCESSNET-T IP DIB-R5 advanced and is the answer not in the manual?
Questions and answers