6-11.Monitoring Operations Of All The Devices In A Specific Zone Or Group - Daikin DCS004A51 Operation Manual

Screen 1: Main screen
(1)
You can change the settings of all the devices included in a
group or zone.
[Procedure]
1. On Screen 1 Monitoring, select a zone or a group from the
pull-down menu (1).
Select a zone from a main display area to be changed.
To change the setting for all the devices in a group, select the
zone including the group from the zone tree area (1), and
select the group from the main display area (2).
2. Press the
Screen 2: Setup screen
(3)
(4) (5)
For an HRV group setting, see the previous page.
English
(2)
. Screen 2 Operation appears.
3. The area under the R/C Mode heading (3) includes three
frames to permit/prohibit operations through remote control-
lers. Select the Set checkbox in each frame to set.
• Start/Stop
"Permitted"
"Stop Only"
"Prohibited"
• Operation Mode
"Permitted" or "Prohibited"
• Set Temperature
"Permitted" or "Prohibited"
4. Upon completion, click the "
To cancel your settings, click the "
6-11 Monitoring Operations of All the Devices in a
Specific Zone or Group
I I I I Procedures for monitoring zone or group operations
Monitor operations in both the Icon and List display modes.
Select a display mode using the "
Operations can be monitored by zone or by group.
Screen 1: Main screen (Icon display mode)
(1)
(3)
To monitor operations of devices in a zone, select the "Monitor-
ing (Zone list)" item from the zone tree area (1). The operation
status appears in the main display area (2).
To monitor operations of devices in a group, select the zone
including the group from the zone tree area (1). The operation
statuses for all the groups included in the selected zone appear.
" button.
" button.
" or " " button.
(2)
(4)
29