Table of Contents
Advertisement
5-10 Changing the Temperature Setting
I I I I Procedure for changing the temperature setting
Change the temperature setting of air conditioners.
On the Monitoring screen, operation is allowed with either Icon
or List as the display type.
In the figure (Screen 1) the devices are displayed in the Icon dis-
play mode.
Screen 1:
Main screen
(1)
The temperature setting can be switched by zone or by group.
If all of the air conditioners in the group selected are in Fan
operation, temperature setting cannot be changed.
[Procedure]
1. On Screen 1 Monitoring, select a zone or a group from the
pull-down menu (1).
Select a zone or a group of which the temperature setting is
to be changed (2).
To change the setting for all the devices in a group, select the
zone including the group from the zone tree area (1), and
select the group from the main display area (2).
2. Click the "
or
ture setting.
Ex.: For the Figure 1 zone setting, the temperature settings
available are between 20 °C and 30 °C inclusive.
Figure 1:
Zone name
Group name
Canteen
1 F North
1 F West
English
(2)
(3)
(4)
" button (4) to change the tempera-
Range of temperature
settings available
(see NOTE)
25-30˚C
20-25˚C
When the temperature setting is 30 °C, the actual tempera-
ture settings for air conditioners are as shown Figure 2:
Figure 2:
Zone name
Group name
Canteen
1 F North
1 F West
NOTE
Range of temperature settings available is the range specified in
accordance with the following.
• Range of temperature settings inherent to the air conditioner
main unit.
• Range of temperature as a result of the restriction by tempera-
ture setting limit set on the intelligent Touch Controller console.
For more information, refer to the intelligent Touch Controller
Software manual.
5-11 Changing the Direction of Air Flow and Air
Volume
I I I I Procedure for changing the direction of air flow/air
volume
Change the fan direction or volume of air conditioners.
On the Monitoring screen, operation is allowed with either Icon
or List as the display type.
In the figure (Screen 1) the devices are displayed in the Icon dis-
play mode.
The fan direction or volume can be changed by zone or by
group.
Screen 1:
Main screen
(1)
[Procedure]
1. On Screen 1 Monitoring, select a zone or a group from the
pull-down menu (1).
Select a zone or a group of which the fan direction or volume
is to be reset (2).
To change the setting for all the devices in a group, select the
zone including the group from the zone tree area (1), and
select the group from the main display area (2).
2. Click the "
or
" button (4) to change the direction of
air flow.
or
Click the "
" button (5) to change the air volume.
Temperature setting
30˚C
25˚C
(2)
(3)
(4)
(5)
19
Hide quick links:
Advertisement
Table of Contents
