Switching The Operation Mode - Daikin DCS004A51 Operation Manual

5-9 Switching the Operation Mode

I I I I Procedure for switching the operation mode
Switch the operation mode of the air conditioner.
On the Monitoring screen, operation is allowed with either Icon
or List as the display type.
In the figure (Screen 1) the devices are displayed in the Icon dis-
play mode.
Screen 1: Main screen
(1)
The operation mode can be switched by zone or by group.
[Procedure]
1. To change the setting for all the devices in a zone, select the
"Monitoring (Zone list)" item from the zone tree area (1), and
select the zone from the main display area (2).
To change the setting for all the devices in a group, select the
zone including the group from the zone tree area (1), and
select the group from the main display area (2).
2. Change the operation mode in the setting area (3). The steps
required for indoor units are different from ones for HRVs.
See the appropriate section.
[Indoor Units]
Click the "
(Screen 2) to change the setting of all the devices in a zone.
Screen 2: Zone setting
Use the group setting area (Screen 3) to change the setting of
all the devices in a group.
Screen 3: Group setting (air conditioners)
18
(2)
(3)
" tab in the zone setting area
Click one of the following buttons according to your requirement.
Changes the operation mode to Cool.
Changes the operation mode to Heat.
Changes the operation mode to Fan.
Changes the operation mode to Set Point.
Changes the operation mode to Auto.
[HRV Devices]
Click the " " tab in the zone setting area (Screen 4)
to change the setting of all the devices in a zone.
Screen 4: Zone setting
Use the group setting area (Screen 5) to change the setting of
all the devices in a group.
Screen 5: Group setting (HRV)
Click one of the following buttons according to your requirement.
Changes the operation mode to Auto-
matic ventilation.
Changes the operation mode to All heat
exchanger ventilation.
Changes the operation mode to Normal
ventilation.
CAUTION 1
Some of the above setting options may not be used depend-
ing on the model of the HRVs. In this case, unavailable but-
tons are grayed out.
CAUTION 2
Mode setting buttons that cannot be used for the selected
zone or group are grayed out.
Ex.:
English