Daikin DCS004A51 Operation Manual page 31

[Displayed Items in the Icon Display Mode]
You can monitor the Start/Stop state and presence or absence
of error, Auto Control setting, and filter/element sign for each
group or zone in the main display area (2).
In the Icon display mode, the bottom bar ((3) in the Screen 1)
displays information on the selected zone or group. The follow-
ing information is offered.
〈When all the devices operate normally〉
• Temperature setting
For a zone, the operation mode of the representative unit is
shown.
• Operation mode
For a zone, the temperature setting of the representative unit
is shown.
• Group name
For a zone, the zone name is shown.
〈When any of the devices failed〉
• Error code
For a zone, the error code that explains the status of the
failed device is shown.
• Group name
For a zone, the zone name is shown.
∗For more information on the representative unit, see the figure
to the right.
[Displayed Items in the List Display Mode]
In the main display area (2) the following zone or group informa-
tion is displayed.
• Start/Stop state
For a zone, see the following section.
• Presence/absence of error
For a zone, see the following section.
• Presence/absence of Auto Control setting
For a zone, see the following section.
• Presence/absence of filter/element signs
For a zone, see the following section.
• Temperature setting
For a zone, the temperature setting of the representative unit
is shown.
• Operation mode
For a zone, the operation mode of the representative unit is
shown.
• Room temperature
For a zone, the room temperature of the representative unit is
shown.
• Error code
For a zone, the error code that explains the status of the
failed device is shown.
30
The frames ((4) in the Screen 1 and 2) at the lower right corner
show legends.
Screen 2: Main screen (Icon display mode)
(1)
To see the detailed legend information shown in the Screen 3,
click the " " button.
Screen 3: Legends screen
To return to the Main screen, click the "
CAUTION 1
Representative unit:
In a zone monitoring process, the following group is selected
as the representative unit.
• In the Icon display mode: the group displayed at the upper
left corner
• In the List display mode: the top group in the list.
(2) (2)
" button.
(4)
English