Table of Contents
Advertisement
Be sure to comply with the safety instructions and warnings provided in this chapter.
Be sure to read these instructions, even if you are already familiar with the operation and
use of other Leica products.
2.1
Safety notes
This instruction manual contains important
instructions and information regarding the oper-
ational safety and maintenance of the instru-
ment.
The instruction manual is an important part of
the product, which must be read carefully prior
to startup and use and must always be kept
near the instrument.
If additional requirements on acci-
dent prevention and environmental
protection exist in the country of op-
eration, this instruction manual
must be supplemented by appropri-
ate instructions to ensure compli-
ance with such requirements.
The protective devices on both instrument and accessories may neither be removed nor
modified. Only service personnel qualified by Leica may repair the instrument and access
the instrument's internal components.
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis for
accident prevention. Primarily responsible for accident-free operation is above all the owner
of the instrument and, in addition, the designated personnel who operates, services or cleans
the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
Leica RM2235
This device has been built and tested in accor-
dance with the directive for machines, 98/37/EC,
and the safety regulations governing laboratory
apparatus.
The following standards serve as a basis:
• DIN EN ISO 12100-1: 2003
• DIN EN ISO 12100-2: 2003
• DIN EN 61010-2-101: 2002
• DIN EN ISO 9001: 2000.
In order to maintain this condition and ensure
safe operation, the operator must observe all
the instructions and warnings contained in this
instruction manual.
2.
Safety
7
Advertisement
Table of Contents
