Table of Contents
Advertisement
6. Optional accessories
6.2.4 Foil clamp type 2
This foil clamp is appropriate for large foil ribbons.
It is mounted in the standard specimen clamp.
66
72
78
79
80
6.2.5 Universal cassette clamp
65
32
82
81
71
60
• To open the jaws (78) and (79) lightly loosen
the 3 screws (81) with an Allen key size 4
71
(
).
• Insert the foil (72) from behind to position it
between the movable jaw (79) and the fixed
jaw (78).
• To clamp the foil, first tighten the screw in
the middle and then the other two screws
(81) with the Allen key (71).
• Place the foil clamp (82) in the standard
specimen clamp so that the beveled surface
(80) on the back of the foil clamp points to
the right or left.
• Turn the knurled screw (66) clockwise to se-
curely clamp the foil clamp in the standard
specimen clamp.
Fig. 27
The universal cassette clamp (UCC)
is designed to for horizontal or verti-
cal clamping of all kinds of com-
mercial cassettes.
• Push the lever (60) to the left.
• Mount the cassette (65) horizontally or verti-
cally as required.
• To clamp the cassette, push the lever (60) to
the right.
Fig. 28
Instruction manual V 1.1 – 02/2005
Advertisement
Table of Contents
