Super Mega Cassette Cla Mp - Leica RM2235 Instruction Manual

6.2.6 Super Mega cassette cla mp

Installing the SuperMega cassette clamp
Leica RM2235
2
The SuperMega cassette clamp should preferably be used together with-
the non-orienting fixture for specimen clamps.
To install the SuperMega clamp, proceed as follows:
First, install the clamp on the specimen head, then remove the rub-
ber ring (5) (do not remove the rubber ring first!).
• Screw the non-orienting fixture for specimen clamps (4) onto the spec-
imen head (3):
Remove screw (1), then put fixture (4) on specimen head (3) from the
front. Tighten screws (2) with Allen key no. 3.
Insert screw (1) from the side and tighten slightly with Allen key no. 4.
• Insert the SuperMega cassette clamp from the left side into the dove-
tail guide of the non-orienting fixture for specimen clamps and tighten
screw (1) completely.
If the orienting fixture for specimen clamps is used with the
knife holder base without lateral adjustment, the orientation
mechanism must be in position „0" and the cover of the back-
lighting must be removed (otherwise, the different parts will
collide).
Never use the SuperMega cassettes together with the back-
lighting system!
6.
4
5
1
Optional accessories
3
Fig 29
33