Address Profile - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-gigabit layer 2/3 1/10-gigabit ethernet switch, 1/10-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch
Hide thumbs Also See for SSE-G24-TG4:
Table of Contents

Advertisement

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-80. Address Settings Page Parameters (Continued)
Parameter
Prefix Length
Address Type

Address Profile

Clicking the A
DDRESS
(Figure
5-99). The parameters for this page are shown in
Table 5-81. Address Profile Settings Page Parameters
Parameter
Profile ID
Adv Status
On Link Adv Status
Auto Conf Adv Status This parameter denotes the Autonomous Configuration Advertise Flag status.
Preferred Time
Valid Time
Description
This parameter indicates the length of the prefix (in bits) associated with this
entry's IPv6 address. The allowed value ranges between 1 to 128.
This parameter specifies that the type of address can be Link-Local,
Global-Unicast or Anycast.
Figure 5-99. Address Profile Settings Page
P
tab brings up the A
ROFILE
Description
This parameter specifies the index of the Address Profile entry.
This parameter specifies the Prefix Advertise status. The allowed value ranges
between 0 to 200.
This parameter indicates the On-Link Advertise Flag status.
This parameter specifies the Preferred Lifetime of the prefix address that uses
this profile. The allowed value ranges between 0 to 4294967295.
This parameter indicates the Valid Lifetime of the prefix address that uses this
profile. The allowed value ranges between 0 to 4294967295.
P
DDRESS
Table
5-120
S
page
ROFILE
ETTINGS
5-81.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents