rEMOvE BLOWEr
HOuSinG
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Remove blower wheel (See page 4-23).
2.
Remove wire connectors from thermistor
and thermal fuse (See page 4-24).
3.
Remove the short 1/4" hex head screw that
secures blower housing to the exhaust duct.
Four Wire
Connectors
4.
Remove three 1/4" hex head screws from
inside the blower housing that secure it to
the motor bracket.
1/4" Hex
Head Screw
Three 1/4" Hex
Head Screws
4-25
rEMOvE BrOkEn
BELT SWiTcH
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Remove dryer drum (See page 4-22).
2.
Remove 2 star head screws from back of
motor bracket.
2 Star Head
Screws
3.
Remove two wire connectors and remove
broken belt switch switch.