Installation Information; Tools And Parts - Maytag MDG25PN Service Manual

inSTaLLaTiOn inFOrMaTiOn

For complete installation instructions
go to the Document Links Page .

TOOLS anD ParTS

Gather the required tools and parts before
starting installation. Read and follow the
instructions provided with any tools listed
here.
Tools needed:
• 8" or 10" Pipe wrench
• 8" or 10" adjustable wrench
that opens to 1" (2.5 cm)
• Flat-blade screwdriver
• Star head screwdriver
• T-20 Security screwdriver or bit
• Level
• 1/4" & 5⁄16" sockets with wrench
• Utility knife
• Pipe-joint compound resistant to type of gas
used.
• Caulking gun and caulk
(for installing new exhaust vent)
• Pliers
Parts supplied:
Remove parts bag from dryer drum. Check
that all parts were included.
• Foot boot (4)
• Dryer foot (4)
• Coin sensor (2) PD only
• International power cord connectors
(Gas only)
2-1