Remove Metercase - Maytag MDG25PN Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove coin box.
2. Remove two 1/2" hex head bolts below coin
box in the front of the metercase.
Two 1/2" Hex
Head Bolts
3. Remove service access door on top rear of
metercase.
4. Remove two 1/2" hex head bolts from inside
the service access area at the base of
the metercase. (See photo at top of next
column)

rEMOvE METErcaSE

5.
6.
4-34
Two 1/2" Hex
Head Bolts
Lift metercase off the top of the dryer.
Remove metercase pad by lifting it off the
top of the dryer.
Metercase
Pad