Rear Seal Removal; Motor/Blower Removal - Maytag MDE2400AY Series Service Manual

Disassembly Procedures
!
11. Slide Retainer Ring and washers from drum shaft.
12.Lift drum from dryer cabinet.
22
WARNING
16023432 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.

Rear Seal Removal

1. Disconnect power supply to unit.
2. Remove dryer Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove Rear Panel.
6. Remove Belt.
7. Remove Drum.
8. Pull Rear Seal away from dryer back.

Motor/Blower Removal

1. Disconnect power supply to unit.
2. Remove dryer Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove Rear Panel.
6. Remove Belt.
7. Remove Drum.
8. Release Tension spring from Motor Assembly.
©2004 Maytag Services