Maytag MDG25PN Service Manual page 16

CODE EXPLANATION
SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Not Selected 'OFF'.
Selected 'ON'. Press DELICATES key pad once for this selection.
If SPECIAL PRICING OPTION is selected, there is access to codes
'3.' through '9.'
Press PERM. PRESS key pad once to advance to next code.
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
SPECIAL CYCLE PRICE
Represents the number of coins (coin 1); may adjust from
0–39. (See b.xx set-up for VALUE OF COIN 1). Advance from
0–39 by pressing WHITES AND COLORS. Factory default of
6 x coin 1.
PN MODELS: Factory default of 0 coins.
Press PERM. PRESS key pad once to advance to next code.
SPECIAL DRY TIME
Represents the number of minutes per coin (coin 1).
Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
By pressing the WHITES AND COLORS key pad, the value
can be adjusted from 1–99 minutes.
PN MODELS: Represents the cycle length for free cycles.
As example: '4.45' = 45 minutes.
Press PERM. PRESS key pad once to advance to next code.
TIME-OF-DAY CLOCK, MINUTES
This is the TIME-OF-DAY CLOCK, minute setting; select
0–59 minutes by pressing WHITES AND COLORS key pad.
Press PERM. PRESS key pad once to advance to next code.
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses the 24 hr. clock.
This is the TIME-OF-DAY CLOCK, hour setting; select 0–23 hours
by pressing WHITES AND COLORS key pad.
Press PERM. PRESS key pad once to advance to next code.
SPECIAL PRICE START HOUR
NOTE: Uses the 24 hr. clock.
This is the start hour; 0–23 hours. Select START HOUR
by pressing WHITES AND COLORS key pad.
Press PERM. PRESS key pad once to advance to next code.
SPECIAL PRICE STOP HOUR
NOTE: Uses the 24 hr. clock.
This is the stop hour; 0–23 hours. Select STOP HOUR
by pressing WHITES AND COLORS key pad.
Press PERM. PRESS key pad once to advance to next code.
SPECIAL PRICE DAY
This represents the day of the week and whether special pricing
is selected for that day. A number followed by '0' indicates no
selection that particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S).
Day of week (1-7) can be chosen by pressing the WHITES AND
COLORS key pad. Press DELICATES key pad once to select
special pricing for each day chosen.
When exiting setup code '9.', the display must show current day
of week:
DISPLAY DAY OF WEEK
10 Day 1= Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
Press PERM. PRESS key pad once to advance to next code.
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
1-10
CODE EXPLANATION
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Not Selected 'OFF'.
Selected 'ON'. Press DELICATES key pad once for this selection.
When selected, the money and/or cycle counts will be viewable
(if counting is selected) when the coin box is removed.
Press PERM. PRESS key pad once to advance to next code.
VALUE OF COIN 1
This represents the value of coin 1 in the quantity of 5% increments
of the larger coin value. 5 x 5% = 25%.
By pressing the WHITES AND COLORS key pad, there is the option
of 1–199 for the quantity of 5% increments.
With coin slide activation, this represents the total vend price.
Press PERM. PRESS key pad once to advance to next code.
VALUE OF COIN 2
This represents the value of coin 2 in the quantity of 5% increments
of the larger coin value. 20 x 5% = 100%.
By pressing the WHITES AND COLORS key pad, there is the option
of 1–199 for the quantity of 5% increments.
PN MODELS: This represents the value of coin 2 in the quantity of 5%
increments of the larger coin value. Factory default = 5 x 5% of the larger
coin value.
PN MODELS USING ENHANCED DEBIT: This represents the value of
top off in quantity of 5% increments of the larger coin value. Factory
default = 5 x 5% of the larger coin value.
Press PERM. PRESS key pad once to advance to next code.
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Replacement of meter case will be needed for coin slide mounting.
Not Selected 'OFF'.
NOTE: This option needs to be set to '00' unless the meter case
has been changed to accept a coin slide device.
Selected 'ON'.
Press DELICATES key pad 3 consecutive times for this selection.
When coin slide mode is selected, set 'b.' equal to value of slide
in coins. Set '6 xx' (REGULAR CYCLE PRICE) and '3.xx' (SPECIAL
CYCLE PRICE) to number of slide operations. 6 01 & 3.01 =
1 slide push.
NOTE: If the installer sets up 'CS' on a coin drop model, it will
not register coins.
Press PERM. PRESS key pad once to advance to next code.
ADD COINS OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
This option causes the customer display to show the number
of coins (coin 1) to enter, rather than the amount.
Not Selected 'OFF'.
Selected 'ON'.
Press DELICATES key pad 3 consecutive times for this selection.
PN MODELS ONLY: In enhanced debit mode, this option is not
selectable.
Press PERM. PRESS key pad once to advance to next code.