Set
IP Set
Users can set equipment IP, mask and gateway, usually used when one computer control
some devices or remote control. It takes effect immediately if users change IP through serial
port, and if change IP through network, it takes effect after reopen the software. If choose
"Auto get ip address", user need not set the IP.
Hot Backup
User can enable or disable the hot backup function. Choose "ON" to set the backup signal for
Hot Backup 1 to Hot Backup 8. It will switch to the backup signal if interrupt signal.
32
Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925771202
Email: sales@rgblink.com
http://www.rgblink.cn