Basic Operation; Layer Settings - RGBlink VENUS X3 Quick Start Manual

default input 1 and input 2, then choose "port 6" Loop To "Input 1", "port 8" Loop To "Input 2"
in the screen params window of the windows control program.

Basic Operation

Layer Settings

New Window: In output screen zone of controlling software, press the left mouse key and
drag on the intended output screen to cover the whole current screen. And the below
interface will be displayed. A window can be opened by click the shortcut key of "New
Window"
Paste Layer: Put the mouse on the window to be copied, right click the mouse, select
"Copy Layer", then right click in output screen zone of controlling software, and select
"paste Layer".
Adjust Window: Two ways can change the size and location of the opened window:
a. Drag and drop the opened window by mouse. The details are: move the mouse to the
lower right brink of the opened window, when the mouse shows"<—>", press the left key of
the mouse and drag the window to a suitable size and then release the mouse. Move the
mouse to the opened window and press the left key of the mouse and move the mouse, then
the window will be moved, release the mouse when moved to the suitable location. But this
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
, or double click the left signal source to be shown on the window.
16
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn