Low Battery - Lockly Secure User Manual

2.7 Low Battery

When the battery is in seriously low condition, Lockly™ will make continuous beeping
sounds in addition to the flashing low battery icon on the touch screen. You should replace
batteries immediately to avoid your smart lock from shutting down.
Condition
Low Battery
Dead Battery
SECTION 2.7
Indicator
Battery Icon on the display keypad
.
will light up to indicate low battery.
When there is no display and sounds;
and screen is non-functional.
9V Battery
Solution
Replace batteries immediately to
avoid battery failure. Lockly™
Secure can still operate up to 300
cycles in low battery condition.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily
activate the lock.
Your Lockly™ will automatically detect
battery polarity. So hold your 9V battery
lead in place against bottom of the
temporarily
Lockly™ to
Access Code
screen to enter your
sure to hold the 9V battery against the
contact points located at the bottom of
the lock until you have successfully
unlocked your door with your
Code
. Once unlocked, batteries should
be replaced immediately.
activate the
. Be
Access
7