Creating Pptp Or L2Tp Wan Connection - D-Link DIR-853 User Manual
Ac1300 mu-mimo wi-fi gigabit router with 3g/lte
support and usb port 3.0
Hide thumbs
Also See for DIR-853:
- User manual (136 pages) ,
- Quick installation manual (64 pages) ,
- Quick installation manual (46 pages)
Table of Contents
Advertisement
DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Creating PPTP or L2TP WAN Connection
On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 68. The page for creating a new PPTP connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 84 of 228
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
