Creating 3G Wan Connection - D-Link DIR-853 User Manual

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual

Creating 3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, go to the USB Modem menu and enter the PIN code
displayed (see the USB Modem section, page 153). Then on the connection creation page, go to the
All Settings tab, select the relevant value from the Connection type drop-down list, and specify
the needed values.
Figure 76. The page for creating a new 3G connection. Selecting a connection type.
Parameter
Enable connection
Connection name
10 For some models of 3G USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the router.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 94 of 228
Configuring via Web-based Interface
Description
10 on the page