D-Link DIR-853 User Manual page 77

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Figure 62. The page for creating a new Static IPv6 connection. The IPv6 section.
Parameter
IPv6 address
Prefix
Gateway IPv6 address
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Get IPv6
Gateway by SLAAC
Gateway IPv6 address
Obtain DNS server
addresses
automatically
Primary IPv6 DNS
server/Secondary IPv6
DNS server
IPv6
For Static IPv6 type
Enter an IPv6 address for this WAN connection.
The length of the subnet prefix. The value 64 is used usually.
Enter an IPv6 address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (Stateless Address
Autoconfiguration).
The address of the IPv6 gateway. The field is available for editing if
the Gateway by SLAAC switch is moved to the left.
Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
server and Secondary IPv6 DNS server fields are not available
for editing.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Page 77 of 228
Configuring via Web-based Interface
Description