D-Link DIR-853 User Manual page 41

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work mode list select the
WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, configure LAN ports to connect an STB or VoIP phone, and set your own password
for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The WISP Repeater mode.
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Wired
connection value. Then from the Work mode list select the Access point value. In this mode
you can change the LAN IP address, set your own settings for the wireless network in the 2.4GHz
and 5GHz bands and set your own password for access to the web-based interface of the device.
Figure 26. Selecting an operation mode. The Access point mode.
Page 41 of 228
Configuring via Web-based Interface