Print Server - D-Link DIR-853 User Manual

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual

Print Server

On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of the
router, power on the printer, then power on the router.
To configure the router as a print server, click the ENABLE button. Upon that the Status of
printer field is displayed on the page.
If you don't want to use the router as a print server, click the DISABLE button.
Figure 108. The Print Server page.
Page 138 of 228
Configuring via Web-based Interface