Selecting Operation Mode - D-Link DIR-853 User Manual
Ac1300 mu-mimo wi-fi gigabit router with 3g/lte
support and usb port 3.0
Hide thumbs
Also See for DIR-853:
- User manual (136 pages) ,
- Quick installation manual (64 pages) ,
- Quick installation manual (25 pages)
Table of Contents
Advertisement
DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Selecting Operation Mode
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP
phone, and set your own password for access to the web-based interface of the device.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the 3G/LTE modem value. In this mode you can
configure a 3G/LTE WAN connection, set your own settings for the wireless network in the 2.4GHz
and 5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 24. Selecting an operation mode. The 3G/LTE modem mode.
Figure 23. Selecting an operation mode. The Router mode.
Page 40 of 228
Configuring via Web-based Interface
Advertisement
Table of Contents
