Related Manuals for D-Link IR850LA1
Summary of Contents for D-Link IR850LA1
- Page 1 Version 1.0 | 02/04/2013 User Manual Wireless AC1200 Dual Band Gigabit Cloud Router DIR-850L...
-
Page 2: Preface
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description February 04, 2013 • Initial release for Revision A1... -
Page 3: Table Of Contents
Web-based Configuration Utility ..........24 Port Forwarding .............85 Internet Connection Setup ..........25 Application Rules ............86 Internet Connection Setup Wizard .......26 QoS Engine ...............87 Internet (Manual) ..............32 Network Filters ..............89 Static (assigned by ISP) ..........34 Access Control ..............90 D-Link DIR-850L User Manual... - Page 4 Networking.Basics............147 Status ................... 114 Check your IP address ............147 Device Info ..............114 Statically Assign an IP address ..........148 Logs.................. 115 Technical.Specifications..........149 Statistics ................. 116 Internet Sessions ............117 Routing ................118 Wireless................119 D-Link DIR-850L User Manual...
-
Page 5: Product.overview
If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-850L will cause damage and void the warranty for this product. D-Link DIR-850L User Manual... -
Page 6: System Requirements
• Internet Explorer 7 or higher mydlink.Requirements • Firefox 3 or higher • Safari 5 or higher • Chrome 5 or higher iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-850L User Manual... -
Page 7: Introduction
Monitor in realtime websites that are being visited with recent browser history displayed on the mydlink™ Lite app – which is great for parents. The D-Link Cloud Service can detect and block unwelcomed guests who try to get into your wireless network and suspicious activities will be displayed right on your mydlink™... -
Page 8: Features
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-850L User Manual... -
Page 9: Hardware Overview
Press the power button to power on and off. Power Receptor Receptor for the supplied power adapter. Reset Button Insert a paperclip in the hole and wait for several seconds to reset the router to default settings. D-Link DIR-850L User Manual... -
Page 10: Leds
WPS process. The light will blink orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but the Internet LED router cannot connect to the Internet. D-Link DIR-850L User Manual... -
Page 11: Installation
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-850L User Manual... -
Page 12: Wireless Installation Considerations
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. -
Page 13: Manual Setup
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. INTERNET POWER DIR-850L Computer D-Link DIR-850L User Manual... - Page 14 Try opening a web browser and enter a web site. If a solid light indicates connection on the Internet port and the router can connect to the Internet. If the LED is orange, the connection is good but the router cannot connect to the Internet. D-Link DIR-850L User Manual...
-
Page 15: Configuration
There are several different ways you can configure your router to connect to the Internet and connect to your clients: • D-Link.Setup.Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14. -
Page 16: Quick Setup Wizard
If this is your first time logging into the router, this wizard will start automatically. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. - Page 17 If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide.me. through.the.Internet.Connection.Settings to display a list of connection types to choose from. Select your Internet connection type and click Next to continue. D-Link DIR-850L User Manual...
- Page 18 ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-850L User Manual...
- Page 19 Click Next to continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-850L User Manual...
- Page 20 If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. D-Link DIR-850L User Manual...
- Page 21 If you clicked Yes, enter your mydlink account name (email address) and password. Click Login to register your router. If you clicked No, fill out the requested information and click Sign.Up to create your mydlink account. D-Link DIR-850L User Manual...
- Page 22 Touch (iOS 3.0 or higher), Android device (1.6 or higher). To download the "mydlink lite" app, visit the Apple Store, Android Market or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-850L User Manual...
-
Page 23: Qrs Mobile App
Section 3 - Configuration QRS Mobile App D-Link offers an app for your iPad, iPod Touch, or iPhone (iOS 4.3 or higher) to install and configure your router. Step.1 From your iPad, Touch, or iPhone, go to the iTunes Store and search for ‘D-Link’... -
Page 24: Shareport Mobile App
1. Insert your USB flash drive into DIR-850L. 2. Scan the bar code to download the SharePort Mobile APP from the app store to your iPhone or iPad. 3. From your iOS mobile device, click Settings. Settings D-Link DIR-850L User Manual... - Page 25 4. Click Wi-Fi, select the Wi-Fi Network Name (SSID) that you created in the setup and then enter your Wi-Fi password. 5. Once connected, click on the SharePort Mobile icon. 6. The following screen will appear. D-Link DIR-850L User Manual...
- Page 26 8. For the Movie section, click the movie icon to play your movie from your USB flash drive. 9. For the Music section, click the music icon to play your music from your USB flash drive. D-Link DIR-850L User Manual...
- Page 27 11. For the Files section, click on the Files icon to view your files from your USB flash drive. 12. For the Folder section, click the folder icon to view your folders from your USB flash drive. D-Link DIR-850L User Manual...
-
Page 28: Web-Based Configuration Utility
To access the configuration utility, open a web-browser such as Internet Explorer and enter address of the router (http://dlinkrouter.local.or.http://192.168.0.1). Non-Windows and Non-Mac users may also connect by typing http://192.168.0.1 in the address bar. Leave the password blank by default. D-Link DIR-850L User Manual... -
Page 29: Internet Connection Setup
Click Manual.Internet.Connection.Setup to configure your connection manually and continue to the next page. If you want to configure your router to connect to the Internet using the wizard, click Internet.Connection.Setup.Wizard. You will be directed to the Quick Setup Wizard. D-Link DIR-850L User Manual... -
Page 30: Internet Connection Setup Wizard
D-Link router and connect to the Internet. Click Next.to continue. Step.1:.Set.Your.Password By default, the D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please enter and verify a password in the spaces provided. - Page 31 Choose this option if your Internet con- nection requires an L2TP username and password to get online. Static.IP.Address: Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually con- figured. D-Link DIR-850L User Manual...
- Page 32 The following parameters will be available for configuration: User.Name: Enter the PPPoE account user name used here. This information is given by the ISP. Password: Enter the PPPoE account password used here. This information is given by the ISP. Click Next.to continue. D-Link DIR-850L User Manual...
- Page 33 Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. Click Next.to continue. D-Link DIR-850L User Manual...
- Page 34 Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a func- tional Internet connection, but using a second DNS address provides more stabil- ity. Click Next.to continue. D-Link DIR-850L User Manual...
- Page 35 Internet connection, but using a second DNS address provides more stabil- ity. Click Next to continue. Setup.Complete! This is the last page of the Internet Connection Setup Wizard. Click the Connect button to save your settings. D-Link DIR-850L User Manual...
-
Page 36: Internet (Manual)
At any given point the user can save the configuration done, on this page, by clicking on the Save Settings button. If you choose to discard the changes made, click on the Don’t Save Settings button. D-Link DIR-850L User Manual... - Page 37 MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-850L User Manual...
-
Page 38: Static (Assigned By Isp)
MAC address unless required by your ISP. You can use the Copy.Your. PC’s. MAC. Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-850L User Manual... -
Page 39: Pppoe (Dsl)
Manual option. To specify a custom schedule, use the drop- down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New.Schedule.button to open the Schedules page. Schedules will be discussed later. D-Link DIR-850L User Manual... - Page 40 MAC address unless required by your ISP. You can use the Clone. Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-850L User Manual...
-
Page 41: Pptp
New Schedule button to open the Schedules page. Schedules will be discussed later. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DIR-850L User Manual... - Page 42 MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-850L User Manual...
-
Page 43: L2Tp
Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later. D-Link DIR-850L User Manual... - Page 44 MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-850L User Manual...
-
Page 45: Ds-Lite
IPv6 WAN Default Gateway Once connected, the IPv6 WAN Default Gateway address will be displayed here. Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DIR-850L User Manual... -
Page 46: Wireless Connection Setup Wizard
Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. D-Link DIR-850L User Manual... - Page 47 Click on the Prev button to return to the previous page. Click on the Cancel button to discard the changes made and return to the main wireless page. Click on the Save button to accept the changes made. D-Link DIR-850L User Manual...
- Page 48 After click the Save button the device will save the settings made and return to the main wireless page. End of Wizard. D-Link DIR-850L User Manual...
-
Page 49: Wi-Fi Protected Setup Wizard
Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. D-Link DIR-850L User Manual... -
Page 50: Manual Wireless Network Setup
To initiate the Manual Wireless Setup page, click on the Manual Wire- less Connection Setup button. On this page the user can configure all the parameters related to the wireless connectivity of this router. D-Link DIR-850L User Manual... - Page 51 If you are not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. D-Link DIR-850L User Manual...
- Page 52 WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. D-Link DIR-850L User Manual...
- Page 53 Pre-Shared Key: Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network suc- cessfully. D-Link DIR-850L User Manual...
- Page 54 RADIUS Server Shared Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to Secret: be able to connect to the wireless network successfully. D-Link DIR-850L User Manual...
- Page 55 If you are not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. D-Link DIR-850L User Manual...
- Page 56 WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. D-Link DIR-850L User Manual...
- Page 57 Pre-Shared Key: Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. D-Link DIR-850L User Manual...
- Page 58 RADIUS Server Shared Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to Secret: be able to connect to the wireless network successfully. D-Link DIR-850L User Manual...
- Page 59 WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. D-Link DIR-850L User Manual...
- Page 60 Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DIR-850L User Manual...
-
Page 61: Wireless Security
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-850L User Manual... -
Page 62: Network Settings
Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-850L User Manual... -
Page 63: Dhcp Server Settings
Network Neighborhood. Learn NetBIOS If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this from WAN: setting off to configure manually. D-Link DIR-850L User Manual... - Page 64 B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available, however, it is preferred you try M-Node operation first. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated. WINS IP Enter your WINS Server IP address(es). Address: D-Link DIR-850L User Manual...
-
Page 65: Dhcp Reservation
(name of your computer or device), MAC Address, and IP address. Enable: Check to enable the reservation. Edit: Click the edit icon to make changes to the reservation entry. Delete: Click to remove the reservation from the list. D-Link DIR-850L User Manual... -
Page 66: Storage
Verify Password: In the Verify Password field, the user can re-enter the password that will be associated with the user account. Click the Add/Edit button the add a new user account or modify an existing account. D-Link DIR-850L User Manual... - Page 67 Click the Append button to add a blank account with the access path and permission specified. Click the OK button to accept the changes made for the existing account. Click the Cancel button to discard the changes made. D-Link DIR-850L User Manual...
- Page 68 WAN IP address will be used. If, however, a DDNS account is specified, then the domain name will be used. Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DIR-850L User Manual...
-
Page 69: Media Server
Use this setting to enable USB 3.0 functionality for the USB port on the back of the router. USB 3.0 provides high-speed transfer speeds with compatible devices. This setting is disabled by default, which means that the USB port will operate at the USB 2.0 specification. D-Link DIR-850L User Manual... -
Page 70: Ipv6
For the advanced user that has configured a router before, click on the Manual.IPv6.Internet.Connection.Setup button to input all the settings manually. To configure the IPv6 local settings, click on the IPv6.Local.Connectivity. Setup button. D-Link DIR-850L User Manual... -
Page 71: Ipv6 Internet Connection Setup Wizard
The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-850L User Manual... - Page 72 Cancel button to discard all the changes made and return to the main page. Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-850L User Manual...
- Page 73 Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify.Password: Re-enter the PPPoE password used here. Service.Name: Enter the service name for this connection here. This option is optional. D-Link DIR-850L User Manual...
- Page 74 These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-850L User Manual...
- Page 75 The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-850L User Manual...
-
Page 76: Ipv6 Manual Setup
Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto. Detection to have the router detect and automatically configure your IPv6 setting from your ISP. D-Link DIR-850L User Manual... - Page 77 Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-850L User Manual...
- Page 78 Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-850L User Manual...
- Page 79 Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. D-Link DIR-850L User Manual...
- Page 80 Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-850L User Manual...
- Page 81 Enter the start IPv6 Address for the DHCPv6 range for your local Range Start: computers. IPv6 Address Enter the end IPv6 Address for the DHCPv6 range for your local Range End: computers. Pv6 Address Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-850L User Manual...
- Page 82 Enter the start IPv6 Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. IPv6 Address Enter the IPv6 Address Lifetime (in minutes). Lifetime: D-Link DIR-850L User Manual...
- Page 83 LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-850L User Manual...
- Page 84 Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local.Only from the drop-down menu. LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-850L User Manual...
-
Page 85: Mydlink Settings
Click the Next button to proceed to the next step. Click the Cancel button to discard the changes made and return to the main page. D-Link DIR-850L User Manual... - Page 86 Click the Login button to login using these account details. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main page. D-Link DIR-850L User Manual...
- Page 87 At any point during this wizard, we can change the prefered language used. To change the language, select the desired language option from the Language drop-down menu, found on the top right of this page. End of Wizard D-Link DIR-850L User Manual...
-
Page 88: Advanced
You can create your own times in the Tools > Schedules section. Select Allow.All (most common) or a created Inbound Inbound Filter: filter. You may create your own inbound filters in the Advanced.>.Inbound.Filter page. D-Link DIR-850L User Manual... -
Page 89: Port Forwarding
You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow. All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced.>.Inbound.Filter page. D-Link DIR-850L User Manual... -
Page 90: Application Rules
The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-850L User Manual... -
Page 91: Qos Engine
ID’s listed. When choosing the option Weight Fair Queue, the router will apply QoS based on the user defined percentage in the Queue Weight column. Queue ID: In this column the Queue ID used will be displayed. D-Link DIR-850L User Manual... - Page 92 0.0.0.1 to 255.255.255.254. Application Enter the application port number used here. Port: Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DIR-850L User Manual...
-
Page 93: Network Filters
To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Link DIR-850L User Manual... -
Page 94: Access Control
P2P utilities or games. Add Policy: Click the Add. Policy button to start the Access Control Wizard. DIR-850L Access Control Wizard Click Next to continue with the wizard. D-Link DIR-850L User Manual... - Page 95 • IP.Address - Enter the IP address of the computer you want to apply the rule to. • Machine.Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method and then click Next to continue. D-Link DIR-850L User Manual...
- Page 96 Dest.Port.Start - Enter the starting port number. Dest.Port.End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy.Table. D-Link DIR-850L User Manual...
- Page 97 To use this feature select to Allow or Deny, enter the domain or website and click Save.Settings. You must also select Apply. Web.Filter under the Access Control section. Select either DENY.computers.access.to.ONLY. Add Website Filtering Rule: these.sites or ALLOW.computers.access.to.ONLY. these.sites. Website URL/ Enter the keywords or URLs that you want to allow Domain: or block. Click Save.Settings. D-Link DIR-850L User Manual...
- Page 98 Inbound Filter This section will list any rules that are created. You Rules List: may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DIR-850L User Manual...
- Page 99 It validates that the traffic passing through the session conforms to the protocol. DIR-850L Anti-Spoof Check: Enable this feature to protect your network from certain kinds of “spoofing” attacks. D-Link DIR-850L User Manual...
- Page 100 NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-850L User Manual...
- Page 101 A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-850L User Manual...
- Page 102 Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless network’s channel over-lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-850L User Manual...
- Page 103 Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This PIN: becomes the router’s PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-850L User Manual...
- Page 104 You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 130 for more information. WPS Button D-Link DIR-850L User Manual...