DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Remote Access
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the router. By default, the access from external networks to the router is closed. If you need to
allow access to the router from the external network, create relevant rules.
To create a new rule, click the ADD button (
Figure 145. The window for adding a rule for remote management.
In the opened window, you can specify the following parameters:
Parameter
IP version
Open access from any
external host
Figure 144. The Advanced / Remote Access page.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Move the switch to the right to allow access to the router for any
host. Upon that the IP address and Mask fields are not displayed.
Page 175 of 228
).
Description
Configuring via Web-based Interface