D-Link DIR-853 User Manual page 212

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
To specify additional settings, click the MORE SETTINGS button.
Figure 170. The System / Traceroute page. The additional settings window.
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of probes
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 212 of 228
Configuring via Web-based Interface
Description