D-Link DIR-853 User Manual page 219

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
In the opened window, you can specify the following parameters:
Parameter
MAC address
IP address
Name
Mode
After specifying the needed parameters, click the SAVE button.
To edit a rule for filtering, select a relevant line of the table, in the opened window, change the
needed values and click the SAVE button.
To remove a rule for filtering, select the checkbox located to the left of the relevant rule and click
the DELETE button (
After completing the work with rules, click the APPLY button.
The MAC address of a device from the router's LAN.
The IP address of a device from the router's LAN.
To assign several fixed IP addresses to a device with a certain MAC
address, click the ADD button, and in the line displayed, enter an IP
address. A device of your LAN can have one IPv4 address and
several IPv6 addresses.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
Enter a name for the rule for easier identification. Optional.
Select an operating mode of the Yandex.DNS service for this rule.
Protection off: when this value is selected, the service provides
the DNS server with no restrictions on access to unsafe web sites.
Safe: when this value is selected, the service blocks access to
malicious and fraudulent web sites.
Child: when this value is selected, the service blocks access to
malicious and fraudulent web sites and blocks access to adult
content.
). Also you can remove a rule in the editing window.
Page 219 of 228
Configuring via Web-based Interface
Description