Table of Contents
Advertisement
Chapter 1
Selection Considerations
54
Figure 8 - PowerFlex 755TM Bus Supply Main Control Board I/O and Jumper Locations
2
1
9
8
Table 26 - Main Control Board Details
Item
Name
1
HIM Connector
2
Fan Connector
3
Control Selector
(1)
4
Embedded EtherNet/IP
Selectors
5
SAFETY Jumper
6
ENABLE Jumper
(1)
7
Built-in EtherNet/IP
Connectors
8
TB1
9
DPI Port 2
(1) Refer to the PowerFlex Drives with TotalFORCE Control Built-in EtherNet/IP Adapter User Manual, publication
for detailed configuration information.
Rockwell Automation Publication 750-RM003A-EN-P - April 2018
3
4
5
6
7
Description
DPI Port 01 (HIM Cradle) connection.
Power supply for internal cooling fan.
Rotary switch for setting the programming mode.
Address
Rotary switches for setting lowest octet of EtherNet/IP address
(forces address to 192.168.1.xxx). See publication
instructions on setting the IP address.
Safety enable jumper. Removed when safety option is installed.
Safety option modules do not function with line side converter, so
this jumper must be installed if this is a line side converter
hardware configuration.
Hardware enable jumper. TB1 becomes an Enable when this
jumper is removed. See
Hardware Enable Circuits on page 55
more information.
Network cable connections.
I/O terminal block.
DPI Port 02, cable connection to 8-pin round mini-DIN chassis-
mounted connector. Mini-DIN connector that is used for handheld/
remote HIM option and 1203-USB connections.
750-PM100
for
for
750COM-UM009
Advertisement
Table of Contents
