Table of Contents
Advertisement
Controller Setup
The information entered in the Setup function will adapt the
controller for operation in your location.
The Setup menu consists of the following items:
•
Setting the Clock
• Setting the Time Zone
• Selecting Auto Daylight Savings
• Setting the Active Station Count
• Selecting the Master Valve Control Option
• Selecting the Stacking Option
• Setting the Water District Number
• Setting the ET Zone Number
• Setting the Maximum Backup ET Value
• Setting the ZIP Code.
About Controller Input
As you begin the controller setup procedures, you will find that
virtually all controller input is accomplished in the same manner
using the Function Selector, Upper Line and Lower Line knobs.
For example, when you turn the Function Selector knob to the
SETUP position, the first item in the Setup menu will appear
on the upper line of the display. In this case, Set Clock Year will
be displayed. The Year currently in memory will be displayed
on the lower Line as shown in the following example:
SET CLOCK (YEAR)
Sep 25 2006
Turning the Upper Line knob steps through the various Setup
menu items (Year, Month, Day, Hour, Minute, Time Zone, etc.).
Turning the Lower Line knob changes the value of the selected
menu item. Any value selection or change you make is entered
into the controller memory when the Upper Line or Function
Selector knob is turned.
A display prompt, similar the example below, lets you know
when you have reached the end of the selected function's menu.
MENU COMPLETE
7
Hide quick links:
Advertisement
Table of Contents
