Installation; Package Contents; Safety Precautions - Bdcom S1010-8P-120 User Manual

Power socket
Connect the female connector of the power cord here, and the male connector
to the AC (Alterna
the power supply meets the requirement of the input voltage
Grounding
The switch already comes with lightning protec on mechanism. You can
also ground the switch through the PE (Protec
or with Ground Cable.
Cau on

Installation

Package Contents

PoE Switch. ........................................ 1
▄
Power Cord....... ................................. 1
▄
User Guide. ....................................... 1
▄
Accessories(Rack angle iron*2, Rack installa on bolt*8, plas
▄
Caution： If any part is lost and damaged, please contact your local agent immediately.

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe the following
rules.
Keep the power off during the installa on.
▄
Wear an ESD-preven ve wrist strap, and make sure that the wrist strap has a good skin contact
▄
and is well grounded.
Use only the power cord provided with the switch.
▄
Make sure that the supply voltage matches the specifica ons indicated on the rear panel of the
▄
switch.
Ensure the vent hole is well ven ated and unblocked.
▄
Do not open or remove the cover of the switch.
▄
Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and
▄
never use any other liquid cleaning method.
g Current) power outlet. Please make sure the voltage of
Please use the provided power cord.
：
Make sure the power socket has a good contact with the ground.
g Earth) cable of AC cord
cushion*4)
4