Table of Contents
Advertisement
WLAN 1
WLAN 2
(green
LEDs)
Red
flickering
Red
blinking
Port Status - Ethernet Port
These LEDs display port-related information.
LS/DA
(green/yel-
low LED)
Off
Green
on continuously
Yellow
flickering
2.6
Operation element (reset button)
The BAT54-F is equipped with a reset button which can be accessed from
outside via a locking screw.
On delivery, the reset button is closed off with a screwable cover cap (protec-
tion class IP67/IP65).
Reset key button
The reset button has two different functions, which are triggered by pressing
the button for different lengths of time:
Resetting the configuration (hard reset) – the button is pressed for long-
er than 5 seconds. All LEDs on the device light up continuously. When the
reset button is released, the device restarts with the factory settings.
The hard reset can be used, for example, if you have to reconfigure the
device independently of any existing settings, or if no connection to the
device configuration can be made.
Device restart (soft reset) – the button is pressed for less than 5 seconds.
The device restarts.
BAT54-F
Release
12/07
WLAN connection and WLAN data traffic
of internal WLAN modules
Error in radio LAN (TX error, e.g. transmission error due to bad
connection).
Hardware error in WLAN module.
Data, link status
Status of the LAN interfaces
No network device connected
Ethernet connection active
Data traffic
31
Advertisement
Table of Contents
