Table of Contents
Advertisement
2.7
Making basic settings
Information on the basic settings of the device can be found in the "Basic
Configuration" user manual on the CD ROM.
State on delivery
You will find information on the delivery state of the device in the "Dual-
Band Industrial Access Point / Access Client / Access Bridge BAT54-Rail"
user manual.
V.24 interface (external management)
At the V.24 connection, a serial interface is provided for the local connec-
tion of an external management station (VT100 terminal or PC with corre-
sponding terminal emulation) or an AutoConfiguration Adapter ACA 11.
This enables you to set up a connection to the Command Line Interface
(CLI) and to the system monitor.
VT 100 terminal settings
Data
Stopbit
Handshake
Parity
The connection is a 4-pin M12 female connector with A coding.
On delivery, the connection is sealed with a cover cap.
The housing of the M12 socket and the signal connections are electrically
connected to the function ground and to the metal housing of the device.
Pin
2
3
1
2
3
1
4
4
V.24
Figure 8: Pin assignment of the V.24 interface (M12 socket)
Note: You will find the order number for the terminal cable, which is or-
dered separately, in the Technical Data chapter
nical
data").
BAT54-F
Release
12/07
8 bit
1 bit
off
none
Function
TX
RX
N.C.
GND
(see on page 34 "Tech-
33
Advertisement
Table of Contents
