Altronix ACMS8 Installation Manual page 6

UL Listed or Recognized Power Supply
AL400ULXB2
AL600ULXB
AL1012ULXB
AL1024ULXB2
eFlow4NB
eFlow6NB
eFlow102NB
eFlow104NB
VR6
VR6 - Voltage Regulator
VR6 voltage regulator converts a 24VDC input into a regulated 5VDC or 12VDC output. It is specifically
designed to work with ACMS8(CB) by allowing to mount the Access Power Controller directly on top of VR6
to save enclosure space and simplify connections. Refer to VR6 Installation Guide Rev. 050517.
Power Input / Output:
• Input: 24VDC @ 1.75A – Output: 5VDC @ 6A.
• Input: 24VDC @ 3.5A – Output: 12VDC @ 6A.
Output:
• 5VDC or 12VDC regulated output.
• Output rating 6A max.
• Surge suppression.
1. Mount VR6 in the desired location/enclosure.
2. Plug-in male 8-pin connector to female 8-pin receptacle on VR6 board.
3. Fasten standoffs. Use metal standoff over mounting hole with star pattern.
4. Align 8-pin male connector with female receptacle of ACMS8(CB), then mount.
5. Connect 24VDC power supply to terminal marked [+ PWR1 –] of ACMS8(CB). Thus Input 1 of ACMS8(CB)
is 24VDC from power supply and Input 2 is determined by VR6's settings (5VDC or 12VDC).
6. Complete steps 4-10 (pgs. 3-4).
Fig. 5
VR6
- 6 -
Maximum Output of Altronix Power Supplies:
Connecting ACMS8(CB) to VR6:
+ IN -- + OUT --
Output Voltage
12VDC or 24VDC
12VDC or 24VDC
12VDC
24VDC
12VDC or 24VDC
12VDC or 24VDC
12VDC
24VDC
5VDC or 12VDC
Overview:
Specifications:
LED Indicators:
• Input and output LEDs.
Electrical:
• Operating temperature: 0ºC to 49ºC ambient.
• Humidity: 20 to 93%, non-condensing.
Mechanical:
• Product weight (approx.): 0.4 lb. (0.18 kg).
• Shipping weight (approx.): 0.5 lb. (0.23 kg).
ACMS8/ACMS8CB
VR6
Max. Output Current
12VDC @ 4A or 24VDC @ 3A
6A
10A
10A
4A
6A
10A
10A
6A
+ IN -- + OUT --
ACMS8/CB Sub-Assembly