Hirschmann OWL LTE M12 Quick Installation Manual

Hide thumbs Also See for OWL LTE M12:

Advertisement

Quick Links

Quick Installation Guide

OWL LTE M12

Safety instruction

Please read and observe the following instructions:
Use the router in compliance with national and international law and in
compliance with any special or additional restrictions regulating use of the
Hirschmann router in the various applications and environments.
To avoid possible injury and/or damage to the device, observe the relevant
provisions and standards. Use only the original accessories as
recommended. Unauthorized device or accessory modification, or using
accessories that have not been approved can result in router damage
and/or violation of the regulations.
Unauthorized device or accessory modification or using the accessories
that have not been approved can result in warranty termination.
Do not open the router.
Caution! The SIM card can be swallowed by small children.
When connecting the device to a power supply do not exceed the defined
voltage.
Do not expose the router to extreme ambient conditions. Protect the router
against dust, moisture, and high temperature.
It is recommended that you do not use the router at petrol filling stations. We
recommend observing local restrictions concerning the use of radio-based
devices while working with explosive material for example, at petrol filling
stations, or in chemical plants.
While using the router close to personal medical devices, such as cardiac
pacemakers or hearing aids, proceed with heightened caution.
Operating the router too close to TV sets, radio receivers, personal
computers, or telephones can cause interference.
It is recommended that you create a copy or backup of the important
settings stored in the memory of the router.
It is recommended that you maintain a minimum distance of 20 cm from
the antenna.
For further product information please visit our web site at
http://www.hirschmann.com/en/QR/OWL-Industrial-Cellular-Routers
(please pay attention to the use of upper and lower case letters)
OWL LTE M12 (Industrial Cellular Router)
Quick Installation Guide
Page 1 of 4
Rel. 01 / Sept. 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OWL LTE M12 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hirschmann OWL LTE M12

  • Page 1: Quick Installation Guide

    Use the router in compliance with national and international law and in • compliance with any special or additional restrictions regulating use of the Hirschmann router in the various applications and environments. To avoid possible injury and/or damage to the device, observe the relevant •...
  • Page 2: First Use

    PIN into the SIM card reader. When removing and inserting the SIM card, press the SIM card into socket until it clicks. Page 2 of 4 OWL LTE M12 (Industrial Cellular Router) Rel. 01 / Sept. 2016 Quick Installation Guide...
  • Page 3 Ethernet cable connection The Ethernet cable is connected to the ETH connector (see the figure below). The Ethernet cable is used to configure and communicate with the router. OWL LTE M12 (Industrial Cellular Router) Page 3 of 4 Quick Installation Guide...
  • Page 4: Configuration Settings

    192.168.1.1 netmask 255.255.255.0 on ETH0. Configuration access is allowed for the user "admin" with the initial password "private". For a detailed description and examples of router configurations, see the Configuration manual on the Hirschmann web site: http://www.hirschmann.com/en/QR/OWL-Industrial-Cellular-Routers. Restoring and backing up the router configuration After you reset the router, the current configuration is overwritten by the default settings.

Table of Contents