Connecting Sensors - Pioneer SGX-CA600 User Manual

Bike 1 to Bike 6
Note
! If you enable auto selection, the device searches the pedaling monitor
sensors, power meters, and smart trainers registered to multiple bikes,
and automatically changes the bike to the one that includes the most
connectable sensors.
When changing is completed, you are notified by a message and sound.
! When the bike is changed, the device also automatically switches to the
registered sensor settings, GPS settings, display settings, sound set-
tings, and other settings, regardless of whether the bike was changed
automatically or manually.
Check that the sensors are connected correctly to the device when the
bike is changed.

Connecting Sensors

You can connect commercially available ANT+ sensors and Bluetooth heart rate
sensors to this device.
Mount the sensors to the bike and then check that they are running before you
begin to connect them.
Refer to the user's guide of your sensors for mounting instructions.
The following sensors can be added.
! ANT+ speed sensor
! ANT+ cadence sensor
! ANT+ speed & cadence sensor
! ANT+/Bluetooth heart rate sensor
! ANT+ power meter
! Left pedaling monitor
! Right pedaling monitor
! Shimano Di2
! ANT+ shifter
! ANT+ smart trainer (ANT+FE-C)
Select the bike to use. Up to six bikes can be registered.
254