Introduction Names and functions of each part Check the accessories This product consists of the following parts. · Main body ① Display ② [Wrap] button Pressing briefly during logging will record the lap. If logging is stopped for 2 seconds or longer, log data is kept Switch to existing screen.
Turn power on / off Initial setting Set the language you want to display on this machine. Turn on the power 1. Press and hold [Start / Stop] button for 2 seconds or The factory setting is "English". more 1. Press the [Enter] button After displaying the opening message, start the meter 2.
basic operation We will explain how to view and use the meter screen as the main screen of this machine, how to log time elapsed Enlarging the data field time, various sensor information, GPS position information Enlarges the data field displayed on the page. etc.
Display status How to read the status bar In status display, screen brightness setting and shortcut On the main menu screen, you can check the status of of GPS setting are added. this machine with the icon displayed in the status bar at Below that you can check the connection status of the the top of the screen.
It will be. When you press the [OK] button, log data is discarded and log Upload log data You will return to the previous screen while stopping. You can upload and analyze the log data saved in the Notes internal flash memory of this machine to the analysis •...