Pioneer SGX-CA600 User Manual page 176

Note
! Press the [Confirm] button to display the data field you wish to display for
the partner enlarged and then press and hold the [Confirm] button.
Select the graph for the data field type and select the partner for the data
category.
Select the partner number for the partner.
! If you use the [←]/[→] buttons to select [Change] and then press the
[Confirm] button, you can change the partner number.
! If the power meter and pedaling monitor connections on the partner
side have not been enabled or the device is searching for the partner
because, for example, you have moved out of range, "- -" is displayed for
the 3-second average power and intensity.
! If the partner has a heart rate sensor connected when a power meter
and pedaling monitor are not connected, the heart rate is displayed in the
place of the 3-second average power and the maximum percentage heart
rate is displayed in the place of the intensity graph.
Changing a partner number
You can change the partner number displayed in the partner screen.
For example, when partner 1 is registered to [CH1] and partner 2 is registered to
[CH2], partner 3 who is added to [CH3] can be displayed as partner 1.
In this case, the partner who was initially partner 1 is changed automatically to
partner 3.
1
Press the [Menu] button.
176