Initial Setup - Pioneer SGX-CA600 User Manual

Initial Setup

When you turn the device on for the first time after purchase, the
initial setup screen is displayed.
First, a QR code is displayed prompting you to go to the down-
load site for the Cyclo-Sphere Control App, which is an app for
smartphones.
The initial setup can also be performed by installing the Cyclo-
Sphere Control App on your iPhone or Android device and then per-
forming the initial setup in the app.
In this case, the initial setup procedure on this device will not be nec-
essary because the meter screen will be displayed when synchroni-
zation with the device is confirmed.
To perform the initial setup by operating the device, press the [→]
button to go to the next screen.
There are a total of three pages in the initial setup (language setting
→ date and time setting → unit system setting).
Note
! To change the language of the screen displaying the QR code, press the
[←] button and select the language.
36