Pioneer SGX-CA600 User Manual page 316

Setting item
Language
Date & Time
Units
Message Time
Initialize / Back Up
Firmware Update
Firmware Version
Serial Number
Wi-Fi MAC address
License
Service Code
Capture
*: Factory default setting
Description
Set the display language for the device (English*/日本
語/Francais/Espariol/繁體中文/Nederlands/Deutsch/
Italiano).
Set the time zone and the current date and time.
If you select the [24-Hour Format] check box, the time is
displayed in 24-hour format. You can also set the display
order for the date.
Set the display units (mi/ft,lb,℉*/km,kg,℃) for distance,
elevation, air temperature, and weight.
Set the time (1 second, 3 seconds*, or 5 seconds) to
display the various messages that are displayed on the
display.
Initialize and back up the device.
You can also restore the status of the device using the
backed up system data.
■Performing Initialization
■Making a Backup
■Performing Restoration
Update the firmware of the device.
Check the system version of the device.
Check the serial number of the device.
Check the Wi-Fi MAC address of the device.
Display the open source license for the software installed
on the device, and the trademark information and
authentication information of the device.
Enter the service code of the device.
Enable or disable* capture.
If this is enabled, pressing and holding the [Lap]
button captures the screen and saves the data
to a PNG file in the device internal memory (/
CA600/Pioneer/Capture/). The file name will be
"CAPTURE_YYYY_MM_DD_hh_mm_ss.png."
When saving completes, the "Screen capture saved."
message appears.
If saving failed because there is insufficient space, the
"Screen capture failed." message appears.
316