Omron V700 Series Operation Manual page 98

Functions
Key Input in Default
Display of MONITOR
Mode
Key Input in Default
Display of RUN Mode
The default display in MONITOR mode appears by setting the key switch to
MONITOR. The READ, WRITE, TEST READ, TEST WRITE, NOISE CHECK,
LAT.ERR INFO, STA. ERR INFO, and SET INFO Keys will be available. No other
keys will be available.
Note If the Controller must be kept in operation, do not input the password with the key
switch set to MONITOR.
The default display in RUN mode appears by setting the key switch to RUN. The
SET INFO and SET Keys will be available. No other keys will be available.
Section
Displays the set data in the
Controller.
Reads the data in ID Tag.
Writes data to ID Tag.
Conducts a test of communications
by reading data from ID Tags.
Conducts a test of communications
by writing data to ID Tags.
Checks the ambient noise.
Displays the latest error log.
Displays the statistical error log.
Displays the set data in the
Controller.
Displays the operating condition
of the Controller.
→
6-6
85