ABB EQmatic
Commissioning
Historical data
Used for the analysis and display of historical measured data.
Note
Measured data for evaluation are not yet available to the system after commissioning. The device saves
data every 5 minutes, so measured data will be available after 5 minutes at the earliest. The display of
historical data also depends on the magnitude of the connected load and the meter's transmission
behavior/resolution.
The following prerequisites must be met to display measured data:
•
•
At the maximum system capacity, historical data can be stored for up to 3 years.
Devices are configured and ready for operation.
Metering structure (see Management > Metering Structure) is configured.
QA/S x.yy.1 | 2CDC512090D0202 83