Instantaneous Values Widget; Percentage Split Widget - ABB EQmatic Product Manual

ABB EQmatic
Commissioning
3.4.4.1

Instantaneous values widget

Used to display measured values, e.g. power, current, voltage etc. in real time.
The following options are available to configure the widget
Options:
3.4.4.2

Percentage split widget

Used to display the relative distribution of total cost, income or CO
displayed according to the selected period (day, month, etc.) and available consumer groups.
The following options are available to configure the widget
Options:
Building node
Medium
Value to display
Chart type
Building node: Used to select the meter and/or building section depending on the metering
structure configured
Medium: Used to select from the available media.
Options: Electricity
Water
Gas
Heat
Value to display: Used to select from the available data points. The choice of data points is
dependent on the meter assigned and its properties.
Chart type: Used to select the required chart type for instantaneous values in the widget.
Options: Serial chart
Gauge chart
Value
Building node
Value to display
Building node: Used to select the meter and/or building section depending on the metering
structure configured.
Value to display: Used to select from the available values.
Options: Cost
Income
CO
2
emissions. The values are
2
QA/S x.yy.1 | 2CDC512090D0202 79